Abstract
The paper presents the technology and electrophysical properties of two ternary multiferroic composites (with a ferroelectric/magnetic percentage of 90/10) obtained by the free sintering method. In the first composite (BT-BF-F), the ferroelectric component was BaTiO3 (BT) and BiFeO4 (BF) (in the amount of 50/50), and the magnetic component was zinc-nickel ferrite (F). In the second composite (BT-PZT-F), the ferroelectric component was BaTiO3 (BT) and strontium and chromium doped PZT-type solid solution (PZT) (in the amount of 50/50), while the magnetic component was zinc-nickel ferrite (F). The component powders were mixed in a high-energy planetary ball mill for 20 h and calcined at 900°C for 3 h, while the multiferroic composite samples were sintered by the free sintering method at 1250°C for 2 h. The multiferroic ceramic composites’ crystal structure, microstructure, DC electrical conductivity, and dielectric, ferroelectric, and magnetic properties were investigated. Studies have shown that the use of two ferroelectric materials in the composite composition has a beneficial effect on the performance parameters, favoring the preservation of high dielectric and magnetic properties of multiferroic composites. The BT-BF-F composite sample exhibits better magnetic properties (higher magnetization values and higher saturation of the magnetic hysteresis loop) but weaker ferroelectric properties (no saturation of the ferroelectric hysteresis loop). In contrast, the BT-PZT-F composite sample exhibits high ferroelectric properties with saturation of the ferroelectric hysteresis loop P-E (maximum polarization Pm=11.2 μC/cm2, residual polarization Pr=2.95 μC/cm2 and coercive field Ec=0.57 kV/mm) but lower values of magnetic parameters. Multiferroic ceramic composites built based on magnetic and ferroelectric materials show interesting functional properties that are adequate for applications in modern microelectronics.
Audience Take Away Notes
- Description of the technological process of multiferroic composite materials with functional properties;
- Familiarization with the method of visualizing the distribution of magnetic and ferroelectric phases in the microstructure of a multiferroic composite;
- Learning the methods and ways of maintaining high ferroelectric and magnetic properties in multiferroic composite materials
